0 item
Wind Turbine Hub Adapter


25.99 25.990000000000002 USD

24.99

This combination does not exist.


You can now use our wind turbine hub and blade sets on your Ametek, Wind Blue, treadmill, or other wind turbine motors with 1/2 Inch (12.7 mm), 5/8 Inch (15.87 mm), or 3/4 Inch (19.0 5 mm) shafts. Convert your wind turbine shaft to the perfect hub size to build your ideal custom wind turbine!


Hub Adapter Features:

  • Made to military specifications
  • Made with your safety in mind
  • Made with a wide shoulder for proper hub seating, not on the threads
  • Fine thread to prevent loosening with constant vibration
  • Comes with 5/16 inch set screws, nut, and lock washer
  • Fully zinc coated (will not rust like aluminum does)
  • Made in the USA


Adapter:

1/2 x 1/2 in
(12.7 x 12.7 mm)

1/2 x 5/8 in
(12.7 x 15.87 mm)
17 mm x 1/2 in
(17 x 12.7 mm)
17 mm x 5/8 in
(17 x 15.87 mm)
17 mm x 3/4 in
(17 x 19.05 mm)
Windmax Adapter
Model #:RHA05_12/12RHA05_12/58RHA12RHA58RHA34FIXMAX
Shaft Diameter:1/2 Inch (12.7 mm)5/8 Inch (15.87 mm)1/2 Inch (12.7 mm)5/8 Inch (15.87 mm)3/4 Inch (19.05 mm)

Windmax & other PMAs
with a 16 mm RH thread

Hub (Center Hole Diameter):1/2 Inch (12.7 mm)1/2 Inch (12.7 mm)17 mm17 mm17 mm17 mm
Thread TPI:20 TPI25 TPI25 TPI25 TPI25 TPI25 TPI
Set Screw Size:5/16 Inches (7.94 mm)5/16 Inches (7.94 mm)5/16 Inches (7.94 mm)5/16 Inches (7.94 mm)5/16 Inches (7.94 mm)5/16 Inches (7.94 mm)
Special Coating:Gold zinc platingGold zinc platingGold zinc platingGold zinc platingGold zinc platingGold zinc plating
Country of Manufacture:Made in the USA
Made in the USAMade in the USAMade in the USAMade in the USAMade in the USA

  

You can compare max 4 products.