The exclusive Missouri Wind and Solar Stars & Stripes tail kit features the signature laser cut stars and stripes in both tail arms and tail, letting your friends and neighbors know you use only the best!
Made with all steel construction, this is the same tail we now use on our wind turbines at our store in Seymour, MO. We've added even more strength and stability by using the new arms which bolt to the top and bottom of our mounting bracket (optional) using eight 1/4 x 1 inch bolts and nylock nuts.
Yes, it has style but it performs even better than expected. Tracking the wind with the proper equipment is essential for any wind turbine's power output. Years of observation, testing, and research go into all of our designs.
Extra wide tail fin for the best wind tracking.
|Freedom PMG Tail Kit
||Freedom II PMG Tail Kit
|Delco style PMAs, Freedom 1600 watt PMGs||Freedom II 2000 watt PMGs|
|Length||33 1/4 Inches (844.55 mm)||39 1/2 Inches (1003.3 mm)|
|40 1/2 Inches (1028.7 mm)||51 Inches (1295.4 mm)|
|Tail Height||29 Inches (711.2 mm)||35 Inches (889 mm)|
Optional Mounting Bracket:
Mounting Bracket Specifications:
|Freedom PMG Mounting Bracket (freewind_brk)||Freedom II PMG Mounting Bracket (freewind_ii_brk)
|Mounting Bracket Height:||8 3/4 Inches (22.2 mm)||8 3/4 Inches (22.2 mm)
|Mounting Bolt Length:||Four 4 inch (101.6 mm) long mounting bolts||Four 8 inch (203.2 mm) long mounting bolts|
|Fits Tower Pole Size:||1 1/2 Inches (1 7/8 Inches OD)||1 1/2 Inches (1 7/8 Inches OD)
|Special Coating:||Hot dipped galvanized||Hot dipped galvanized
|Mounting Bracket Material:||Steel||Steel
Watch the video below as Jeff explains how to assemble the Missouri Stars and Stripes wind turbine tail (components in the video may vary from the item listed).