0 item
HVA-D All in One Charge Controller Board with Inverter



Inverter Option: With Inverter

935.99 935.9900000000001 USD

935.99

This combination does not exist.

Category: Charge Controllers


All In One Charge Controller Board for Wind Turbines and Solar Panels


Each Model Includes:


12 Volt All in One Charge Controller Board24 Volt All in One Charge Controller Board
ModelHVAD-CBSU12WHVAD-CBSU24W
Charge Controller440 Amp 10,000 Watt HVA Digital Hybrid Charge Controller with  fully digital user interface
Disconnect Box60 Amp Heavy Duty Disconnect Box
Dump/Divert Load1200 Watt Diversion Dump Load Resistor Bank
Inverter

12 Volt 2000 Watt DC to AC modified inverter by Aims

  • PWRINV200012
  • Continuous output power: 2000 Watts
  • Surge power capability (peak power): 4000 Watts
  • 3 AC receptacles (UL rated 1500 watts max per an outlet)
  • DC input / operating voltage: 10 to 16 Volts
  • Output voltage: 120 Volts AC +/- 10%
  • Volt meter & watt meter on front panel

24 Volt 2500 Watt model DC to AC modified inverter by Aims

  • PWRIN250024W
  • Continuous output power: 2500 Watts.
  • Surge power capability (peak power): 5000 Watts
  • Dual AC receptacle with protective rubber covers
  • DC input / operating voltage: 20 to 30 Volts
  • Output voltage: 120 Volts AC +/- 10%
  • Volt meter & watt meter on front panel

FuseFuse with ANE Fuse BlockFuse with ANE Fuse Block

Designed, assembled and quality checked in Missouri USA using global parts.


HVA Digital Hybrid Controller for Wind Turbines & Solar Panels


Use this controller to regulate and prevent battery overcharge in: Solar Systems, Wind Systems, &  Hydro Systems


Some of the key features of the HVA Digital Charge Controller are:

  • Fully Digital user interface.
  • Solenoid based with 3 stage charge control (bulk, absorb, and float modes).
  • No jumpers or potentiometers need to be set.
  • LCD 2 x 16 Back-lit display
  • Both manual and automatic equalize modes are available.
  • Dual shunts for monitoring both solar and turbine amperage and wattage.
  • Automatic Nominal Battery Voltage Detection.
  • Nearly all charge parameters can be set.
  • Relay on time can be controlled and set for diversion times up to several hours.
  • Upper and lower set points can both be set.
  • Automatic LCD back light dimming to save energy.
  • Dual internal Truck Star breakers, one each for your turbine input and diversion output.


** The solenoid in this unit has been tested to over 440 amps. We have installed two 150-amp breakers as a standard configuration. 

This allows for 9000 watts of wind power in a 48-volt system, 4500 watts in a 24-volt system and 2250 watts in a 12-volt system. 

Solar systems should be designed for no more than 125 amps continuous current. **


Specifications for " HVA-D All in One Charge Controller Board with Inverter "

Inverter Option : With Inverter
Voltage : 12 Volts or 24 Volts
You can compare max 4 products.