0 item
12/24 Volt AC Converter Smart Battery Charger UL Listed


198.33 198.33 USD

198.33

SKU: CON120AC1224DC


The AIMS Power AC Converter / Battery Charger / Power Supply 12V/24V is ideal for applications that require diverse ways of recharging batteries. There are many ways to recharge batteries and the wide AC input range of this unit accommodates most applications and battery technologies. Useful with generators and shore power, this converter charges various types of batteries such as open lead acid, AGM, Gel and LiFePO4.

The reliable high-frequency structure accepts a wide range of input voltages of 70 VAC to 145 VAC to accommodate unstable inputs. The unit also auto-detects 12 VDC or 24 VDC battery bank. The AIMS Power AC Converter / Battery Charger provides the flexibility for almost any application and the large charging capacity of 75 amps gets the job done quickly.

Perfect for RVs, boats, campers and much more.


Features:

  • Large charging capacity design (75 Amp for 12Vdc; 37.5 Amp for 24Vdc) charges a 100 amp hour battery in under an hour up to 90% charge
  • Power supply up to 75 amps at 12Vdc or 37.5 amps at 24Vdc
  • Three stage smart charger with variable charging voltage algorithm for maximizing  battery life (bulk, absorb and float)
  • 4 pre-programmed charging algorithms using the dip switches for the most common charging profiles
  • Charges lead-acid, AGM, GEL and LiFPO4 batteries
  • Adjustable charge current control dial to safely charge smaller battery(s)
  • Wide input voltage range, 70Vac to 145Vac for unstable inputs
  • Reverse polarity, over voltage, under voltage, short circuit, over temperature  protections
  • High AC to DC converting efficiency design  >80%
  • Smart fan control for maximizing the performance and fan life
  • Includes battery temperature sensor port to help maintain the life of the battery(s) (battery temperature sensor not included)
  • AC input cord – 4ft
  • Listed to UL 458 and CSA 22.2 NO. 107.1
  • 2 Year warranty

Specifications: 

Input Voltage96-145VAC full performance
 70-96VAC automatically de-rate to 50% of full load current
Frequency40Hz to 70Hz
Nominal Input Current at Rated Output<9Aac
Voltage Measurement Accuracy±8Vac
Frequency Measurement Accuracy±1Hz
Output 
Nominal Voltage12/24VDC manual adjustable
Output Current

Input voltage 96-145V,

output current 75A for 12V mode

output current 37.5A for 24V mode

 

Input voltage 70-96V,

output current 37.5A for 12V mode

output current 18.75A for 24V mode

Rated Output CurrentManual adjustable
Current Accuracy± 6% of full rated output current @25°C, for target currents across the range from 10% rated output (for absorption exit criteria accuracy) to the current limit set point.
Load Regulation1.5%
Current Limit75-80 Amp
Dead-Battery Charging8-14.9VCat 100% of rated output current
 8-29.8VCat 100% of rated output current
Selectable Battery TypeOpen Lead-Acid, Gel, AGM, LiFePo4, adjustable
Parallel OutputsMaximum of two AC converter units connected in parallel
Efficiency80%
Protection 
Input Over VoltageUnit must be safe for input voltage up to 150VACRMS (and up to 215V peak), need not be operating. Above this level the unit may be damaged.
Reverse Battery Polarity ProtectionNon-destructive reverse battery polarity protection with fuses. Unit shall not sustain damage and shall meet all specifications after fuse replacement.
Input Under-voltageUnit must not be damaged for all input voltages from 0-300VAC. Shutdown or input current limit or other means may be applied when input voltage is out of normal operating range.

Output over voltage

12/24V mode

12Vdc. Unit will shut down if Vcharging > Vcharging (target) + 1.0VDC for more than 2 seconds; unit will restart when voltage <= Vcharging (target) for more than 2 seconds.For battery OVP the unit will restart in the same stage.
 24Vdc. Unit will shut down if Vcharging > Vcharging (target) + 1.5Vdc for more than 2 seconds; unit will restart when voltage <= Vcharging (target) for more than 2 seconds.For battery OVP the unit will restart in the same stage.
Charger over temperature protectionThe internal temperatures of the charger will be measured by NTC. Based on these measurements, unit will shut down if the temperature exceeds 105°C. Unit will restart when environment temperature cools to 95 °C.
BTS(Battery Temperature Sensing)

The battery temperature sensor allows the charge controller to

continuously adjust charge voltage / charge current based on actual battery temperature.

When the battery temperature is over 40 °C, unit will reduce the charging voltage to Float voltage, also it will reduce the Max charging current by 10% with every two degree of temperature rise.

When the battery temperature is over 50 °C, unit will shut down.

Environmental 
Operation temperature

Nominal ambient temperature: 25°C

Operating Ambient Temperature range: -10°C to 40°C

(On the heat sink of DC-DC part, if the temperature is over 90 ℃, the Charger Current will be de-rate to 50% ; if the temperature is over 105 ℃, the Unit will be shut down.)

Relative humidity5~95% without condensation
NoiseUnit requirements: below 50dB (A) measured at 1 m distance with fan full working.
Storage Conditions Temperature-20°C to +80°C
CoolingSmart fan control
SafetyUL458,CSA22.2#107.1
Mechanical 
Dimension (D x W x H) mm10.25” * 6.75” * 3.25”
Unit Weight6.5 lb
Boxed Weight7 lb
You can compare max 4 products.