To view larger, simply click the images above.
To view a larger image, simply click on the diagram above.
The diagram above is from our dual meter series. This single amp meter uses the same internal power supply, so hookup instructions are the same, however there is no voltage measurement. There is a big difference in this unit’s internal power supply and the ones you will see being advertised for powering panel meters. [...]
Simply hook up the two terminals from the meter to each side of the shunt (one wire per side). Then place your shunt in series with the load or energy source you wish to monitor. For instance, if you will be measuring the current from a solar panel, then terminate the positive wire from the [...]