|
|
 |
|
100 Watt Poly Solar Panel
Model: SA-100M
Price: $125.00
Weight: 22.8lbs
Date Added: Wednesday 17 April, 2013
|
|
|
100 Watt 12 Volt Charging. Connect two or more in series to charge 24 volt systems. Connect 3 or more in series to charge 48 volt systems. You can also connect 1 or more directly to our DC water heating elements. Product Specifications: Dimensions: 29 1/2" x 49 1/4" x 1 3/8" Item Weight: 22.3 |
|
|
|
|
|
|
100 Watt Solar Panel Kit
Model: 100W_Solar_Kit
Manufacturer: Missouri Wind and Solar
Price: $198.89
Weight: 36lbs
Date Added: Thursday 11 October, 2012
|
|
|
Missouri Wind 100 watt solar panel kit For 12 or 24 Volt battery charging Kit Includes: 1 - 100 Watt Solar Panel 1 - 10 Amp 12/24 Volt charge controller 40 feet solar cable 1 - male MC4 connector 1 - female MC4 connector |
|
|
|
|
|
|
100 Watt Solar Panel Kit w/ 300 Watt Pure Sine Wave Inverter
Model: 100W_Solar_Kit_300WINV
Manufacturer: Missouri Wind and Solar
Price: $298.89
Weight: 42lbs
Date Added: Monday 22 April, 2013
|
|
|
Missouri Wind 100 watt solar panel kit with AIMS 300 watt Pure Sine wave inverter Kit Includes: 1 - 100 Watt Solar Panel 1 - 10 Amp 12/24 Volt charge controller 40 feet solar cable 1 - male MC4 connector 1 - female MC4 connector 1 - 12 Volt 300 Watt Pure Sine Wave Inverter |
|
|
|
|
|
|
100 Watt Solar Panel Kit w/ 400 Watt Modified Sine Wave Inverter
Model: 100W_Solar_Kit_400WINV
Manufacturer: Missouri Wind and Solar
Price: $238.89
Weight: 40lbs
Date Added: Monday 22 April, 2013
|
|
|
Missouri Wind 100 watt solar panel kit with AIMS 400 Watt Modified Sine wave inverter Kit Includes: 1 - 100 Watt Solar Panel 1 - 10 Amp 12/24 Volt charge controller 40 feet solar cable 1 - male MC4 connector 1 - female MC4 connector 1 - 12 Volt 400 Watt Modified Sine Wave Inverter |
|
|
|
|
|
|
1000 Watt Power Inverter 12VDC 120VAC Compact
Model: PWRB1000
Manufacturer: AIMS
Price: $74.00
Weight: 5lbs
Date Added: Thursday 15 April, 2010
|
|
|
Overview: Modified Sine Wave Power Inverters represent the most economical solution for powering a large number of appliances. The waveform produced by a Modified Sine Wave Power Inverter is blocky,resembling a set of steps, whereas the waveform produced by utility companies is smooth, much like a curvy road. Therefore, because of the type of waveform the Modified Sine Wave Power Inverters produce, they are suitable for most applications. Modified Sine Wave Power Inverters are more efficient in converting battery power to AC. So if you're looking to make a pot of coffee, run a heater or air conditioner, or appliances that can withstand occasional electrical noise, a Modified Sine Wave |
|
|
|
|
|
|
1000 Watt Pure Sine Inverter Charger - 12 Volt
Model: PICOGLF10W12V120V
Manufacturer: AIMS
Price: $649.00
Weight: 39lbs
Date Added: Friday 01 February, 2013
|
|
|
The AIMS Power 1000 Watt Pure Sine Low Frequency Inverter with Built-in Charger. This inverter charger is perfect for small sized industrial applications where you need to depend upon power being there under heavy load. This heavy-duty inverter charger is ready to go where ever you need it to; from the Camp Site to the Tailgating party all the way to helping power your essential home appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1000 watts is not enough power check out our full line of low frequency inverter chargers available in 12, 24 and 48 volts. This AIMS power inverter charger is capable of accepting any source of 120v AC power to |
|
|
|
|
|
|
11 G4 Raptor Blades and Hub
Model: HWB11
Manufacturer: Missouri Wind and Solar
Price: $224.00
Weight: 16.5lbs
Date Added: Wednesday 01 September, 2010
|
|
|
This kit comes with 11 - Generation 4 (G4) Raptor blades and an eleven blade hub. Our Raptor Generation 4 blades can last 75 years in the sun - Made to withstand extreme heat and sub-zero temps. High speed, high efficiency, economical and durable. Generation 4 Blade Specifications: - Manufactured in Missouri by Missouri Wind - Perfectly balanced - Resistant to ultraviolet light! - Will NEVER crack or degrade - Clockwise rotation - Each blade is 29" long - Assembled turbine diameter is 59" - Blade base is 6" wide - Blade tip is 1 1/8" wide - Blades weigh approximately 1 pound each - Lifetime Guarantee 11-Blade Hub Specifications: - 10" diameter, 1/4" thick - Laser cut, perfectly balanced, |
|
|
|
|
|
|
12 volt 50 Amp auto resettable wind turbine generator fuse
Model: 50AMP_RE_FUSE
Price: $6.98
Weight: 0.5lbs
Date Added: Friday 30 November, 2012
|
|
|
12 VOLT 50 AMP AUTO RESETTABLE FUSE FOR WIND TURBINES KEEP YOUR WIND TURBINE FROM BURNING OUT! YOU CAN KEEP YOUR WIND TURBINE TO A 50 AMP OUTPUT WITH THIS 12 VOLT 50 AMP AUTO RESETTABLE BREAKER. Auto Reset Circuit Breaker is a Single Pole (Type 1) breaker. The metallic material inside the circuit breaker allows electricity to flow as long as the current stays under 50 amps. If the current exceeds 50 amps, the fuse will disconnect and the current stops flowing. The circuit breaker will remain disconnected until the current drops below 50 amps. Once the current drops below 50 amps, the metallic material inside the circuit breaker cools, continuity is restored and electricity starts to flow |
|
|
|
|
|
|
12 Volt 600 Watt Divert Load Resistor
Model: DVL2-12
Manufacturer: Missouri Wind and Solar
Price: $59.98
Weight: 3lbs
Date Added: Monday 11 October, 2010
|
|
|
This divert load resistor is for use to divert the excess power being generated when your wind turbine generator batteries are full and can be ran at 100% duty cycle due to the quality rib wound design. It can also be used with a solar array in diversion mode. This dump load can be used for 12 volt battery systems only. The unit can be used alone to provide free heat as well by hooking your turbine or solar panels directly to it. For an alternative dump load see our dc water heating elements. Dimensions: (approx.) 11.5"x4"x3 1/4"inches (29.21cm x 10.16cm x 8.25cm) Specifications: (approx.) 12 volt 50 amp 600 watt You need to divert the excess power being generated to a load so your wind |
|
|
|
|
|
|
12 Volt Diversion Load Resistor/Heater
Model: 262
Manufacturer: Missouri Wind and Solar
Price: $129.00
Weight: 9lbs
Date Added: Wednesday 01 September, 2010
... more info
|
|
|
Diversion Load Center designed for use with Diversion Controllers. This diversion center can be mounted to a wall to provide heating as well as serve as a diversion (dummy) load. These resistors have been selected specifically to perform as diversion (dummy) loads in solar/wind/hydro alternate energy systems. Unlike dc water heating elements, this unit does not need to be submerged in water or oil. It will operate in free air. For an alternative dump load see our dc water heating elements. Each of the resistors we sell has been selected based on its ability to dissipate a very specific amount of power (watts) with a very specific resistance value (ohms), at a very specific voltage. When |
|
|
