The KACO blueplanet xi-series is an inverter family that is unparalleled in its class and once again, has set new energy output and efficiency standards. Longevity and reliability have been the outstanding characteristics and key objectives of all KACO developments since our companies creation over 60 years ago. During the middle of the last century, KACOs mechanical AC-choppers created the basis for today's reliable inverters. Reliability has remained a key characteristic of all blueplanet inverters for years. KACO is happy to announce the official launch of our latest generation of the blueplanet inverter series.

The unit comes with an integrated connection box with a DC/AC switch satisfying the NEC requirement for disconnecting the AC and DC circuits. Installation is as simple as mounting a bracket to the wall, hanging the inverter and installing a single bolt into the wall. The 02xi inverters are lightweight and easy to lift onto the wall bracket. The connection box allows conduit to enter from left, right, bottom, or rear sides for increased installation flexibility. The new neutral silver enclosure is pleasing to the eyes. The inverter CEC efficiency has been increased for all units to 95.5%. The overall design has been simplified and made more reliable using the latest generation of Digital Signal Processing (DSP) control technology. Field configuration of positive or negative ground is now provided as well as 208 VAC or 240 VAC grid connection with or without a neutral present. Last but not least, the inverters now come with the option of the KACO watchDOG an integrated communication card that allows superior web enabled monitoring of your PV system.

Features:
- Field selectable grid voltage connection for 208/240 VAC and 220 VA (for Mexico)
- Integrated AC/DC disconnect switch
- Input voltage range: 125 - 550 VDC (maximum voltage of 600V)
- Field selectable positive or negative grounding
- User-friendly, KACO display with two-key operation
- Night switch to illuminate the LCD
- Easy to access front flip panel
- Compact and lightweight NEMA 3R enclosure design
- RS485 interface standard
- Inverter is fully separable from the AC/DC disconnect switch box housing for easy maintenance and/or repair
- Electrically isolated dual converter principle in HF technology

Specifications:
- DC operating range (MPP): 125-400 V
- Max DC input voltage: 550 V
- Nominal DC input current: 14.3 A
- Max DC short circuit current: 21.45 A
- Max continuous output: 1500 W
- Max over current protection: 15 A
- Max continuous current: 8 amps
- AC operating range: (240 V ) 211-264 V, (208 V) 184-226 V
- Frequency: 60 Hz (59.3-60/5 Hz)
- CEC rated efficiency: 240 V-95.5%, 208V-95%
- DC reverse polarity protection
- Ground fault protection
- Backlit LCD w/ convenient night switch and push button controls
- Easylink RS485 & S0 port
- Ambient Temp: -4 F - +104 F
- Ambient operating temp: -4 F - + 140 F
- Thermal protection
- Noise emissions: < 35 dB (silent operation)
- Night power consumption: .3 W
- Warranty: Standard easy swap 10 years
- Safety compliance: UL 1741, IEEE 1547, NEC, CSA 22.2 No. 107.2-01
- Communications compliance: FCC Part 15 Class B
- Dimensions: (HxWxD)-30" x 14"x 8.25"

Quality construction - Made in Germany