Diversion Load Center designed for use with Diversion Controllers. This diversion center can be mounted to a wall to provide heating as well as serve as a diversion (dummy) load. These resistors have been selected specifically to perform as diversion (dummy) loads in solar/wind/hydro alternate energy systems. Unlike dc water heating elements, this unit does not need to be submerged in water or oil. It will operate in free air. For an alternative dump load see our dc water heating elements.

Each of the resistors we sell has been selected based on its ability to dissipate a very specific amount of power (watts) with a very specific resistance value (ohms), at a very specific voltage. When used as recommended, they will not burn out, even under continuous use.

Please note that these resistors will become hot during normal use, please mount them away from heat sensitive objects and out of the reach of children. The diversion load center consists of six resistors mounted directly onto two sheets of CNC cut, 16 gauge metal sheets (A left and right sheet). These two sheets form the electrical connection for the six resistors. Both sheets are mounted to a solid piece of ceramic board. Two terminals with brass nuts are provided for a solid connection to your wiring.

Please do not use a 12 volt unit on 24 volt systems as it will be damaged quickly, and may result in fire, injury or worse!

Dimensions:
24 Volt units are enclosed in a Hoffman 8 x 12 x 4 enclosure with a vented cover

Model #DL500W24V: 18 Amp, 540 Watt, 24 Volt
Model #DL1000W24V: 35 Amp, 1000 Watt, 24 Volt